Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   

Language

Why the ice machine can quickly produce ice

2021/08/02
Ice maker (English name: ice maker or Tube Ice Machine) is a kind of refrigeration mechanical equipment that produces ice after passing water through an evaporator and cooled by a refrigeration system refrigerant. It adopts a refrigeration system and uses a water carrier to pass through a certain Ice is produced behind the equipment. According to the principle of the evaporator and the different production methods, the shape of the ice cubes produced is also different; people generally divide ice machines into pellet ice machines, flake ice machines, plate ice machines, tube ice machines, shell ice machines, etc. Wait. Tools: 1. The chilled water pump in the water storage tank continuously circulates through the plate-type or subdivided evaporator; 2. After the compressor is running, it is inhaled-compressed-exhausted-condensed (liquefied)-throttling-then in the evaporator In the low-temperature evaporation of -10 to -18 degrees, it absorbs heat and vaporizes. Chilled water continuously condenses into an ice layer on the surface of the lower temperature evaporator at a water temperature of 0 degrees. When the ice layer has condensed to a certain thickness, when the evaporation temperature of the refrigerant reaches the temperature-controlled setting temperature, the defrost solenoid valve is turned on, and the deicing is usually performed in the form of a heat pump, and then the next cycle is realized. Principle: Through the water inlet valve, water automatically enters a water storage tank, and then pumps the water to the shunt pipe. The shunt pipe evenly flows the water to the evaporator cooled by the low-temperature liquid refrigerant. The water is cooled to the freezing point. The water that reaches the freezing point will solidify and become ice, and the water that has not been frozen by the evaporator will flow into the water storage tank and restart the circulation through the water pump. When the ice cube reaches the required thickness, it enters the deicing state, and the high-pressure hot air discharged from the compressor is led to the evaporator through the reversing valve to replace the low-temperature liquid refrigerant. In this way, a water film is formed between the ice cubes and the evaporator. This water film causes the ice cubes to leave the evaporator. When the ice cubes fall freely into the ice storage tank below under the action of gravity.
Guangzhou Icesource Co., Ltd's products comply fully with all compatible producing regulations.
Have you been looking for a good cold room supplier ice maker machine provider? If so, we suggest that you check out Guangzhou Icesource Co., Ltd at Icesource .
A quality monitoring group created for ensuring that Guangzhou Icesource Co., Ltd manufactures cold room supplier accoording the strictest standard.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
العربية
English
Español
français
Polski
Português
русский
Türkçe
Current language:English