What are the tips for using the snowflake ice maker

by:CBFI     2021-11-13
What are the tips for using the snowflake ice maker? I will lead everyone to learn more about it. 1. Snow ice maker should use independent power supply, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding. 2. The snowflake ice maker should be installed in a place far away from heat sources, without direct sunlight, and well ventilated. The ambient temperature should not exceed 35°C to prevent excessively high ambient temperature from causing poor cooling of the condenser and affecting the ice making effect. The ground on which the ice maker is installed should be firm and level, and the ice maker must be level, otherwise it will cause no ice removal and noise during operation. 2. The clearance between the back and the left and right sides of the ice maker is not less than 30cm, and the clearance between the top is not less than 60cm. 3. The water used in the Snowflake must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold. And affect the ice making performance. 4. Turn off the power when cleaning the ice machine. It is strictly forbidden to flush the machine directly with the water pipe, use neutral detergent to scrub, and it is strictly forbidden to clean with acidic, alkaline and other corrosive solvents. 5. Snowflake ice maker must unscrew the water inlet hose head for two months to clean the water inlet valve filter to avoid the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller and cause no ice production. 6. Snowflake ice maker must clean the surface of the condenser for dust every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser. 7. The water pipe, sink, refrigerator and protective film of the cbfi ice machine should be cleaned every two months. 8. When snowflakes are not in use, they should be cleaned, and the ice molds and moisture in the box should be blown dry with a hair dryer. They should be placed in a ventilated and dry place without corrosive gas. Avoid storage in the open air. The above is a detailed introduction to the use of the snowflake ice machine. If you want to improve its efficiency and effect, you must be proficient in the use of the snowflake ice machine. It is useful to know more about this knowledge.
There are a lot of businesses today that are very much in demand and one of them is a cold room supplier.
If you are thinking of having a , then you must be first clear about the purpose, which is driving you to buy this device. Guangzhou Icesource Co., Ltd offer quality for your needs with complete assurance of ability to serve your purpose.
ice maker machine problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of ice maker machine technology, now provides a perfect cure for that.
The team of engineers and developers at Guangzhou Icesource Co., Ltd are the best in their own way and we promise to provide timely service to our esteemed clients.
Visit Icesource for the best in ice maker machine cold room supplier supplies and get the most cost effective for your cold room supplier solution. Design and customization are also welcomed.
Custom message
Contact