Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   

Language

To maintain the ice machine well, the following four steps must be taken

2022/01/31

Before the water pump of the ice maker starts to work, the refrigeration compressor is plugged in and works for 30 seconds to cool the air conditioner evaporator (ice shelf). After 30 seconds of pre-cooling, the water pump works and the flowing water is led into the ice. The mold frame is refrigerated after flowing through each ice tray. When the thickness of the ice maker exceeds the set thickness, the ice thickness detector of the ice maker receives the information, or the making time exceeds 45 minutes, the ice maker automatically enters the deicing During the whole process, the heat flow relay just started to work, the cbfi ice machine water pump stopped working, the heat flow passed through the air conditioner evaporator for heating, and the ice was just started to de-ice.

 To overhaul the ice machine, we must understand the basic principle of the ice machine in four steps

  First: Start the refrigeration unit:

   Turn on the power of the cbfi ice machine The main switch and the water valve are plugged in, and the water leaks at the beginning, which can automatically control the water level line of the system. The hot air valve of the ice maker automatically equalizes the working pressure of the system software, and the refrigeration compressor is plugged in for the first time, and the start is delayed for 30 seconds. Once the refrigeration compressor of the ice maker is started, it will continue to work during the whole process of ice making and de-icing. The centrifugal fan of the ice maker is operated under temperature control. After the refrigeration compressor of the ice maker is started, it will be delayed for 30 seconds, and the water pump will start to work. .

  Second: Pre-cooling ice making:

  Before the water pump of the ice maker starts, the refrigeration compressor should be plugged in and work for 30 seconds to cool the air conditioner evaporator (ice shelf). , After 30 seconds of pre-cooling, the water pump works, and the flowing water is led into the ice mold frame. After flowing through each ice tray, it is refrigerated. When the thickness exceeds the set thickness, the ice thickness detector of the ice maker receives the information content, or When the making time exceeds 45 minutes, the ice maker enters the whole process of deicing automatically. The heat flow relay just starts to work, the ice maker water pump stops working, the heat flow passes through the air conditioner evaporator to heat up, and the ice maker just started deicing. However, if the ice making time is less than 5 minutes, the ice maker will not be easy to start the de-icing process (ie, the ice making lock time is at least 5 minutes).

   Third: De-icing:

   When the heat flow relay of the ice maker is turned on, the hot refrigerant cyclone heats the ice mold frame, so that the ice cubes slip off and fall into the cbfi ice machine storage. In the refrigerator, the slid ice cubes fall off, the ice skating board is pulled open and quickly calibrated, the ice maker comes to an end and the ice maker has just started the ice making process, so the system continues to circulate.

  Fourth: Shut down when the ice is full:

   When the de-icing process is completed, if the ice machine storage refrigerator is full of ice cubes, a piece of ice cannot be dropped. Press on the ice machine's skating board to keep it on and it cannot be calibrated. After about 30 seconds, the ice machine will automatically shut down (the shutdown lock time is 3 minutes) until the next amount of ice is taken out. After the skating board is calibrated, and the shutdown time has elapsed for 3 minutes, the ice maker will restart.

The four steps of    refer to the basic principles of the entire working process of the ice maker. You can only first understand the basic principles of the entire working process of these four steps and understand how the ice maker works. How to overhaul the ice machine!


Guangzhou Icesource Co., Ltd promises that we will manufature our products in accordance with the strictest quality standards.
You will find a wide variety of for sale for virtually any ice maker machine needs. Keep in mind how you plan to use the , and talk with a professional about the model and features that are right for your application. Go to Icesource for on sale.
Guangzhou Icesource Co., Ltd always think about our customer first. To determine what the consumers would want out of their relationship on social, and work from there.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
العربية
English
Español
français
Polski
Português
русский
Türkçe
Current language:English