The laboratory snowflake
cbfi ice machine adopts R134a fluorine-free compressor, and its parts are tested by SGS company and meet the requirements of the EU RoHs environmental protection directive; the spiral hob extrusion ice making type has a compact structure and realizes the automatic separation of ice and water. The optimized design of the blade edge makes the ice shape small and practical; the heat insulation layer of the box body is fluorine-free foam, which has good heat preservation effect. , Over-cooling protection display, fault warning display and other protective shutdown functions. The
cbfi ice machine will automatically stop when the ice is full and lack of water, and it will automatically turn on when there is electricity or water, and it has an automatic memory recovery function. This machine can be widely used in hospitals, schools, laboratories, scientific research institutes and other occasions, as well as in supermarkets, food preservation, fisheries and cold storage, medical applications, chemical, food processing and other industries.
The working principle of Snowflake : The chilled water pump of the water storage tank continuously circulates through the plate-type or compartmentalized evaporator; after the compressor is operated, it is suction-compressed -Exhaust gas-condensation (liquefaction)-throttling-then evaporate in the evaporator at a low temperature of -10 to -18 degrees to absorb heat and vaporize. The chilled water is constantly condensed into ice on the surface of the lower evaporator at a water temperature of 0 degrees. Layer. When the ice layer condenses to a certain thickness, the evaporation temperature of the refrigerant reaches the set temperature of the temperature control, and the defrost solenoid valve is turned on, usually in the form of heat pump deicing. Then the next cycle is realized. Snow system Tips for using the ice machine: 1. The ice machine should use an independent power supply, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding. 2. When the ice maker is not in use, it should be cleaned, and the ice mold and moisture in the box should be blown dry with a hair dryer. It should be placed in a non-corrosive gas and ventilated and dry place. Avoid storage in the open air. 3. Turn off the power when cleaning the ice machine. It is strictly forbidden to flush the machine directly with the water pipe, use neutral detergent to scrub, and it is strictly forbidden to clean with acidic, alkaline and other corrosive solvents. 4. The ice maker should be installed in a place far away from heat sources, without direct sun exposure, and well ventilated. The ambient temperature should not exceed 35°C to prevent excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. 5. The cbfi ice machine must clean the surface of the condenser for dust every two months. Poor condensation and heat dissipation will cause damage to the compressor components.
With new and upcoming social commerce technologies, the biggest change for
cold room supplier marketers will be a shift in focus from branding to lead generation and conversion.
Guangzhou Icesource Co., Ltd will make a healthy profit for its owners and provide a rewarding work environment for its employees.
Before investing in a ice maker machine cold room supplier, it can benefit to have an understanding of the different types of and the most effective strategies to ice maker machine. Go to Icesource for more tips.
