Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   


The use of laboratory snowflake ice maker needs to be cautious

The wide application of the laboratory snowflake ice maker not only brings convenience to our life and work, but also improves some of the use methods and relative precautions of the laboratory snowflake ice maker. For this reason, I will introduce you to some laboratories. The details of using the snowflake ice maker to make your use more smoothly: 1. The laboratory snowflake cbfi ice machine requires that the gap between the back and the left and right sides of the machine is not less than 30cm, and the top gap is not less than 60cm to ensure that the heat transfer of the machine is relatively good. 2. The laboratory snow ice maker should use an independent power supply, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding. 3. The water used in the laboratory snowflake ice maker must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold. And affect the ice making performance. 4. Turn off the power when cleaning the snowflake cbfi ice machine in the laboratory. It is strictly forbidden to flush with the water pipe directly at the body, use neutral detergent to scrub, and it is strictly forbidden to clean with acidic, alkaline and other corrosive solvents. 5. The laboratory snowflake ice maker must unscrew the water inlet hose head for two months to clean the water inlet valve filter to avoid the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller and cause no ice production. 6. The laboratory snowflake ice maker must clean the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser. 7. The laboratory snowflake ice maker is placed in a non-corrosive gas, ventilated and dry place, and should not be stored in the open air. The above is a more detailed improvement of the use of the laboratory snowflake ice maker. I hope it will be helpful to you. If you find a malfunction in the laboratory snowflake ice maker, you should contact us immediately.
Competitiveness policy of Guangzhou Icesource Co., Ltd is about existing clusters as a platform for upgrading microeconomic fundamentals, where structural policies aim to change the industrial composition of an economy more directly.
More about the most suitable , visit Icesource to get your offer!
The stability of the system, controllability of the ice maker machine process, and mobility of the machines provide with a flexible and reliable cold room supplier system.
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English