The ice machine is safe to use in this way! At present, the application of ice machines in life is more and more extensive, not only in restaurants, bars, ice coffins, but also in convenience stores and other industries. Ice makers are now accepted by the majority of people and have entered thousands of households. Therefore, the safe use of ice machines should also be more popular. Now I will clearly introduce the safety issues that should be paid attention to when using the Tube Ice Machine
. Precautions for the use of ice maker The ice maker should be installed in a place far away from heat sources, without direct sun exposure, and well-ventilated. The ambient temperature should not exceed 35 degrees Celsius to prevent excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. . The ground where the ice maker is installed should be firm and level, and the ice maker must be level, otherwise it will cause no ice removal and noise during operation. The gap between the back and the left and right sides of the ice machine is not less than 750px, and the top gap is not less than 1500px. Independent power supply should be used, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding. The water used by the ice maker must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold. And affect the ice making performance. When transporting the Tube Ice Machine, handle it with care to prevent severe vibration. The handling slope should not be less than 45 degrees. After long-distance transportation, the Tube Ice Machine should be placed for 2-6 hours before opening the machine ice. Turn off the power when cleaning the ice machine. It is strictly forbidden to flush the machine directly with the water pipe, use neutral detergent to scrub, and it is strictly forbidden to clean with acidic, alkaline and other corrosive solvents. The ice maker must unscrew the head of the water inlet hose for two months to clean the water inlet valve filter to avoid sand and mud impurities in the water from blocking the water inlet, causing the water inlet to become smaller and causing no ice production. The dust on the surface of the condenser must be cleaned every two months. Poor condensation heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser. The water pipe, sink, refrigerator and protective film of the ice machine must be cleaned every two months. When not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer. It should be placed in a ventilated and dry place without corrosive gas. Avoid storing in the open air. Ice maker storage is also very important. Do not place the ice maker outdoors in a cold and humid environment. Keep the ice maker dry and tidy when storing the ice maker.
Nowadays, it is very common for us to utilise in ice maker machine. And the quality of is decisive to production efficiency.
Guangzhou Icesource Co., Ltd take prudent risks and work together to assure our success and profitability in the future.
Guangzhou Icesource Co., Ltd attach great importance to the quality of our products and R&D services.
As consumers get more and better information regarding how to compare various products and companies, it is critical to compete on the price and value of cold room supplier.