The ice maker manufacturer will explain to you the precautions for the operation of the ice maker

During the operation of the cbfi ice machine, the ice making equipment also needs frequent maintenance of the ice maker, so that the ice maker can prevent some common faults from appearing during the use process and prevent the ice maker from showing faults. inconvenient. The following ice maker manufacturer, Bingquan, will introduce the operation instructions and precautions of the cbfi ice machine.　　1. Ice making operation process　　 (1) Before starting up, you must check whether the active water supply equipment is normal and whether the water tank storage is reasonable (the water level has been adjusted to the correct level when the machine leaves the factory, and the user does not need to adjust it).　　(2) Plug in the power source, the ice maker starts to work, and the main water pump starts to run (the pump has a short-time air discharge process) after about 2 minutes, the compressor starts to start, and the machine enters ice making conditions.　　(3) When the thickness of the ice cube reaches the set thickness, the ice plate probe starts to activate, the solenoid valve starts to operate, the water pump stops working, the hot air enters the evaporator, and the ice cube falls in about 1.5 minutes. When the ice cube is falling, turn the falling ice baffle over and turn on the magnetic reed switch. When the reed switch is closed from the beginning, the machine enters the ice making process again.　　(4) The compressor does not stop during the entire ice making and deicing process. (5) When the ice storage bucket is full and the magnetic reed switch cannot be actively closed, the machine actively stops operation. When the ice cubes are removed, the magnetic reed switch is closed from the beginning, and the machine starts after a delay of 3 minutes and enters the control system from the beginning. Ice process. 2. Adjust the thickness of the ice bridge (1) The thickness of the ice bridge should be about 3mm, and the distance between the probe and the evaporator should be about 1.5mm thicker than the actual ice bridge thickness. Turn the adjustment screw clockwise to increase the thickness of the ice bridge. (The thickness of the ice bridge is changed by 1.5mm when the screw is rotated 1/3 turn).　　(2) Check the wiring of the ice plate probe and the connecting bracket, and ensure that it can roll freely so that it can return to the correct position after each ice making process.　　 Deqing Bingquan Refrigeration Equipment Co., Ltd. is a professional refrigeration equipment manufacturing enterprise integrating Ru0026D, production and sales. The main products are: ice machine, flake ice machine, ice shaver, ice cream machine, display cabinet, deep freezer, beer bar, air curtain cabinet, combined island cabinet and other refrigeration equipment. At the same time, it undertakes cold storage construction and other businesses. The 'Jinggong' ice maker series introduces first-class imported equipment to maximize the speed of machine ice making, thereby saving resources. Its main structure adopts world-renowned imported accessories, and the system is accurately matched. The ice cubes are exquisitely shaped and crystal clear. Loved by customers at home and abroad!

Guangzhou Icesource Co., Ltd offers a ton of features and capabilities to help you acquire and retain customers, boost sales and manage contacts.
Guangzhou Icesource Co., Ltd strives to reflect the highest ethical standards in our relationships with members, providers, and shareholders.
ice maker machine cold room supplier is one of the most commonly used tool for ice maker machine.