The ice machine manufacturer introduces how to carry out better daily maintenance

　　 Compared with other refrigeration equipment, the ice maker has a higher technical content, so the use environment and regular maintenance of the ice maker are very important to the service life and ice making effect of the ice maker. Now let the ice maker manufacturers introduce how to carry out better daily maintenance. Welcome to read!

　　 1. The ice maker should be installed in a place away from heat sources, direct sunlight, and well ventilated. The ambient temperature should not exceed 35 degrees Celsius to prevent the condenser from being affected by the ambient temperature. Excessive heat dissipation will affect the ice making effect. The ground on which the ice maker is installed should be firm and level, and the ice maker must be level, otherwise the ice cubes and noise will not fall off during operation.

　　2. The gap between the back and the left and right sides of the cbfi ice machine is not less than 30cm, and the top gap is not less than 60cm.

　　3. The ice maker should use an independent power supply, powered by a dedicated line, equipped with a fuse and a leakage protection switch, and be reliably grounded.

　　4. The water used by the ice maker should meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe, polluting the water tank and the ice mold . Affect ice making performance.

　　 5. Operate the ice machine carefully during transportation to prevent severe vibration. The slope of the transportation should not be less than 45 degrees. After long-distance transportation, the ice maker should be placed for 2-6 hours before turning on ice making.

　　6. Please turn off the power when cleaning the ice machine. It is forbidden to flush the machine directly with water pipes, to scrub with neutral detergents, and to clean with corrosive solvents such as acids and alkalis.

　　7. The ice maker must unscrew the head of the water inlet hose for two months, and clean the water inlet valve filter to prevent the inlet water from being blocked by sediment and impurities in the water. As a result, the water inflow becomes smaller, resulting in no ice making.

　　 8. The dust on the surface of the condenser must be cleaned up every two months. Condensation and poor heat dissipation can cause damage to compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. To clean the oil on the condensing surface, do not use sharp metal tools to clean, so as not to damage the condenser.

　　 9. The water pipe, water tank, refrigerator and protective film of the ice maker should be cleaned once every two months.

　　 10. Clean the ice machine when not in use, and use a hair dryer to dry the ice mold and the moisture in the box. It should be placed in a dry, ventilated, and non-corrosive place, and should not be stored in the open air.

　　 The above is about how the ice maker manufacturer introduces how to carry out better daily maintenance. Thank you for your patience! If you want to know more about cbfi ice machine manufacturers, you can consult our online customer service, and we will serve you wholeheartedly.

cold room supplier ice maker machine, as the name suggests, find extensive use in ice maker machine institutions. Since ice maker machine has become much dependent on technology in today's world, there is wide use of such cold room supplier.
We humbly ask you to use cold room supplier and we guarantee that you would be in a great delight with using the product.
The value you get from watching how Guangzhou Icesource Co., Ltd operates and runs our company and the potential mentorship you would get from us will go a long way towards helping customers understand our company.
Our company is professional in selling cold room supplier as well as providing a series of relevant services.