The composition system of the flake ice machine and how to maintain it?

　　 At present, most of the flake ice machines on the market adopt an ice-making method in which the internal ice blade rotates to scrape the ice. This method has low wear and tear and effectively prevents refrigerant leakage. Because the flake ice itself is thin, the flake ice produced in this mode is relatively uniform. The following editor will introduce you to the composition system of the flake ice machine and how to maintain it. Welcome everyone to read!

The composition system of the flake ice machine:

　　 1. Water circulation system, the tap water of the water circulation system passes through the water supply pipe. The float valve flows into the water tank. The water in the water tank is pressed into the water diversion tray by the pump to maintain a certain water level, and then naturally flows into the inner surface of the evaporator, and at the same time it gradually cools, and part of it freezes into ice. Under the action of ice skates, the ice falls off the surface of the evaporator and falls into the refrigerator, and the rest of the water flows back to the water tank.

　　2. In the refrigeration system, when the liquid refrigerant flows through the evaporator cylinder, the refrigerant that starts to evaporate cools the evaporator cylinder through heat exchange. At the same time, part of the water flowing through the inner surface of the evaporator is frozen into ice, which leaves the surface of the evaporator under the action of ice skates and falls into the refrigerator. The reflux water is frozen into ice again by the evaporator under the action of the pump, forming a repeated ice making cycle.

　　3. Transmission system, including reduction motor and reduction gear. The reducer drives the reducer to rotate, and the output shaft of the reducer drives the main shaft, ice skates and water distributor to rotate. After the inner wall of the evaporator freezes, the ice knife separates the ice from the inner surface of the evaporator and falls into the refrigerator.

　　 4. Control system, the control system monitors the entire working process of the flake ice machine by a computer board. For example, ① the water tank lacks water, ② the speed of the reducer is low, ③ the temperature of the evaporator is high, and protects the machine under abnormal conditions, and there are warning lights and buzzers to alert the cause of shutdown.

Maintenance of flake ice machine:

　　 Before doing flake ice machine maintenance, turn off the main power supply of the flake ice machine. In order to carry out the following work:

　　1. The water tank, evaporator, water storage tank, water distribution tray and surface of the flake ice machine are recommended to be cleaned once a month.

　　2, the condenser of the flake ice machine plays a role of heat dissipation during the refrigeration process. The cleanliness of the condenser directly affects the ice making effect, and the cleanliness of the condenser must be ensured. Air-cooled condensers are recommended to be cleaned once in three months under normal conditions, and once a month under special circumstances; water-cooled condensers are cleaned once in six months under normal conditions, and in special circumstances, once every three months, and cooling towers are recommended to be cleaned once a month. .

　　3. Check the gap between the ice skates and the ice bucket every six months; check the oil level of the reducer every six months, and it is recommended to change it every twelve months.

　　4. The oil level and oil color of the flake ice machine in the compressor with oil sight glass should be observed frequently. The normal oil level of the compressor, the refrigerating oil is transparent and colorless. If there is a qualitative change, please ask a professional to replace it.

　　 5. When the flake ice machine is out of service for a long time (more than fifteen days), if the ambient temperature is below 5°C before deactivation, the ice machine uses a water-cooled condenser. The water in the condenser should be drained to avoid frostbite and condensation. Please carefully check the various parts of the cbfi ice machine and supply water before starting up.

　　 Thanks for reading, the above is the composition system of the flake ice machine and how to maintain it? The introduction, part of the content comes from the Internet, for reference only. If you want to know more about the details of the flake ice machine, please call for detailed inquiry, and we will be happy to help you.

Guangzhou Icesource Co., Ltd have now make a decision to enlarge our company in other countries.
Guangzhou Icesource Co., Ltd are dedicated to providing excellent underwriting and loss control advice up front, and to ensuring superior customer service through the life of the policy.
Guangzhou Icesource Co., Ltd really created a whole persona around cold room supplier’s manufacturing and selling, and it's so innovative that people really respond to it.
Rewards and discount programs give customers more reason to come back for cold room supplier again, especially in the competitive retail and services markets.