Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   


Standardization of the use of laboratory snowflake ice maker

What should be paid attention to in the use of laboratory snowflake ice maker? Let's briefly understand the precautions for the use of the laboratory snowflake ice maker: 1. When cleaning the laboratory snowflake cbfi ice machine, turn off the power. It is strictly forbidden to flush the body directly with the water pipe, and use neutral detergent to scrub it is strictly prohibited. Use acidic, alkaline and other corrosive solvents to clean.  2. The laboratory snowflake ice maker must unscrew the water inlet hose head for two months to clean the water inlet valve filter to prevent the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller and cause no ice production.  3. The laboratory snowflake ice maker must clean the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser.  4. The water pipe, sink, refrigerator and protective film of the laboratory snowflake ice maker should be cleaned once every two months.   5. When the laboratory snowflake ice maker is not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer. It should be placed in a non-corrosive gas and ventilated and dry place. Avoid storage in the open air.   6. The ice maker should be placed in a place where acidic corrosive gas is generated, especially copper pipes, and the aluminum products on the radiator are active metal materials, which are generally easy to be corroded by acidic atmosphere. Acidic corrosive gas is also serious for electrical components, which can easily cause poor contact and affect the normal operation of the control system. The above introduction is the precautions for using the laboratory snowflake ice maker. I hope everyone should pay attention to it before using the laboratory snowflake ice maker in daily life, and use it correctly to avoid some dangers. If you need a stand-alone laboratory snowflake ice maker The ice machine welcomes us, and we will provide you with products and equipment.
In the office, various are considered essential since they are used to achieve particular tasks in the office. Among these , cold room supplier, ice maker machine, and ice maker machine are widely used.
Finding the best products has been made easier, at Guangzhou Icesource Co., Ltd. Here you can see completed ranges of produced with advanced equipment and strict quality control. Go to Icesource and send your enquiry if you have any question.
Guangzhou Icesource Co., Ltd is an online resource for today's modern woman to live a green, healthy, and happy life. We offer cold room supplier, ice maker machine and more! Pls visit our site at Icesource to know more.
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English