1. Air-cooled split
flake ice machine
1. For machine size and installation site, please refer to the technical parameters of each machine or contact us
2. Installation of machinery and equipment: After installing the refrigeration unit part and the ice bucket ice making part in a fixed position, connect the unit and the ice bucket with the liquid supply pipe and the return pipe of the same pipe diameter respectively; use after connecting the pipes After confirming that the welded pipeline part is leak-checked, the nitrogen is vented, and the connected welded pipe and ice bucket are evacuated with a vacuum pump; after the vacuum is completed, the ball valve is opened to communicate with the system.
3, Water system installation: the water supply pressure requirement is 0.1-0.5MPa better; connect the water source to the water inlet of the ice maker, and connect the overflow port on the water tank to a place where water can be drained on site, and the drain port is only for cleaning Used when the water tank.
4. Installation of the main power supply: The power supply of the equipment adopts a three-phase five-wire system, three live wires, one neutral wire, and one ground wire. According to the mark of the wire, connect to the power supply; if the device cannot be started, you can After intermodulating the phase sequence of any two of the three phase wires, start the operation equipment again.
Note: Before starting the
cbfi ice machine, make sure that the compressor oil and refrigerant have been added.
2. Air-cooled integral flake ice machine
1. For machine size and installation site, please refer to the technical parameters of each machine or contact us
2. Installation of machinery and equipment: Place the
cbfi ice machine on top of the ice storage, and confirm that the ice drop port is aligned with the center of the ice storage port
3. Water system installation: 0.1-0.5MPa for water supply pressure is better; connect the water source to the water inlet of the ice maker, and connect the overflow port on the water tank to a place where water can be drained on site, and the drain port is only for cleaning Used when the water tank.
4. Installation of the main power supply: The power supply of the equipment adopts a three-phase five-wire system, three live wires, one neutral wire, and one ground wire. According to the mark of the wire, connect to the power supply; if the device cannot be started, you can After intermodulating the phase sequence of any two of the three phase wires, start the operation equipment again.
Three, water-cooled flake ice machine
1. For machine size and installation site, please refer to the technical parameters of each machine or contact us
2. Installation of machinery and equipment: Place the cbfi ice machine on top of the ice storage, and confirm that the ice drop port is aligned with the center of the ice storage port
3. Water system installation: the water supply pressure requirement is 0.1MP-0.5MP better; connect the water source to the water inlet of the ice maker, and connect the overflow pipe on the water tank to the place where the water can be drained on the spot, and the water outlet is only Used when cleaning the water tank.
4. Installation of cooling tower: According to the markings on the machine, connect the cooling tower, water pump, and condenser, pay attention to the direction of the water inlet and outlet when connecting, and connect the power cord of the cooling tower water pump and fan to the electric control box. The corresponding terminal.
5. Installation of the main power supply: The equipment power supply adopts a three-phase five-wire system, three live wires, one neutral wire, and one ground wire. According to the mark of the wire, connect to the power supply; if the device cannot be started, you can After intermodulating the phase sequence of any two of the three phase wires, start the operation equipment again.
Three, maintenance
1. Condenser cleaning: The ice machine adopts air-cooled heat dissipation form. Generally, the condenser fins need to be cleaned in one month. The specific cleaning time period depends on the air cleanliness of the working environment of the equipment and the use of the machine. It depends on the frequency. Keeping the condenser clean can make the equipment run in the best state, reduce energy consumption, and extend the service life.
2. Cleaning of water tank and water distribution tray: If the water tank and water distribution tray work for a long time, the flake ice produced by the production of scale, sediment, and bacteria breeding in the water tank and water distribution tray will be contaminated. It is necessary to regularly use acidic substances such as vinegar for cleaning, and then use a disinfectant for disinfection to ensure the sanitation and cleanliness of the water tank.
3 Maintenance of the reducer: regularly check whether the bolts of the reducer are loose and whether the rotation of the reducer is smooth and stable.
Installation diagram of wind integral flake ice machine
Schematic diagram of air-cooled split installation
is a must have for anyone who appreciates ice maker machine to the greatest extent.
Guangzhou Icesource Co., Ltd is a rapidly growing Manufacturing Company based in China. We offer a wide range of equipment that helps in ice maker machine which are safe, durable and economical. We provide
cold room supplier, ice maker machine, ice maker machine,etc. more about and cold room supplier solutions are covered in Icesource . Take a visit!
If you need any help in cold room supplier ice maker machine, Guangzhou Icesource Co., Ltd can help you. We provide the best in class. Our design and services will enable you to create the ideal room that you have always wanted!
