Precautions in the use of the ice machine!

　Ice makers have certain applications in many fields. There are some problems that need attention when using ice makers.

　　1. The ice maker should be installed in a place far away from heat sources, without direct sunlight, and well ventilated. The ambient temperature should not exceed 35°C to prevent excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. The ground where the cbfi ice machine is installed should be firm and level, and the ice maker must be level, otherwise it will cause no ice removal and noise during operation.

　　2, the clearance between the back and the left and right sides of the ice machine is not less than 30cm, and the top clearance is not less than 60cm.

　　 3. The ice maker should use an independent power supply, dedicated line power supply and equipped with fuse and leakage protection switch, and reliable grounding.

　　4. The water used by the ice maker must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold.

　　 5. When cleaning the ice machine, you should Turn off the power, it is strictly forbidden to flush the machine directly with the water pipe, use neutral detergent to scrub, and it is strictly forbidden to clean with corrosive solvents such as acid and alkali.

　　6. The ice maker must unscrew the water inlet hose head for two months, clean the water inlet valve filter, and avoid sand and mud impurities in the water from blocking the water inlet and causing it The water inflow becomes smaller, resulting in no ice making.

　　7. The ice maker must clean the surface of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser.

　　 8. The water pipe, sink, and refrigerator of the ice maker should be cleaned once every two months.

　　9. When the ice maker is not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer, and placed in a non-corrosive gas and ventilated and dry place , Avoid open storage.

CBFI is the leading manufacturer of cold room supplier and related products.
Guangzhou Icesource Co., Ltd assures you that you will be satisfied with its results and humbly request you to try this. We are hoping for a better business deal with you.
Guangzhou Icesource Co., Ltd has developed its range of products around its own market research, which discovers customers' precise needs.
Data has always been important in business, of course. But with the arrival of digital data—its volume, depth, and accessibility—it has become clear it is key to helping Guangzhou Icesource Co., Ltd develop sustainable competitive advantage.