Flake
industrial ice maker operating procedures [selected] First, the user must check whether the automatic water supply device is normal and whether the water tank storage capacity is reasonable before starting the machine. If there is no problem, plug in the power and the flake
industrial ice maker starts to work. First, the water pump starts to run for about 2 minutes and the compressor starts to start, and the machine enters the ice making state. Secondly, when the flake ice reaches the set thickness, the ice plate probe starts to operate, the defrost solenoid valve starts to work, and the flake ice falls in about 1 minute. When flakes of ice fall, turn the falling ice baffle over and turn on the magnetic reed switch. When the reed switch is closed again, the machine enters the flake ice state again. Third, when the ice in the bucket is full and the reed switch cannot be closed automatically, the machine automatically stops working. When enough ice is removed and the reed switch is closed again, the machine will start after a delay of 3 minutes and enter the ice making process again.
Additionally, Guangzhou Icesource Co., Ltd has a few new features planned to roll out in the app to provide more convenience, comfort and options to our clients.
As a result, consumers will reward CBFI with leadership sales, profit, and value creation, allowing our customers in which we live and work to prosper.
Making a few technical tweaks to the way you structure and distribute
cold room supplier could be the difference between an engaging, thought-provoking product and a perfunctory one.
