Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   


It is necessary to understand the relevant knowledge to use the snowflake ice machine

The knowledge of snowflake ice maker requires gradual progress. It is necessary to understand the relevant knowledge to use the snowflake ice machine, but the technical knowledge is not fully understood in a short while. We must pay attention to the learning method when we are learning the knowledge of the snowflake ice maker. 1. The ambient temperature of the snowflake ice maker installation should not exceed 35°C to prevent the excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. 2. The ground on which the snowflake cbfi ice machine is installed should be solid and flat, and the ice maker must be level, otherwise it will cause no ice removal and noise during operation. 3. The water used in the Snowflake must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold. And affect the ice making performance. 4. The clearance between the back and the left and right sides of the cbfi ice machine is not less than 30cm, and the clearance between the top is not less than 60cm. 5. Snow ice maker should use independent power supply, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding. 6. Turn off the power when cleaning the ice machine. It is strictly forbidden to flush the machine directly with the water pipe. Use neutral detergent for scrubbing. It is strictly forbidden to clean with acidic, alkaline and other corrosive solvents. 7. Snowflake ice maker must unscrew the water inlet hose head for two months to clean the water inlet valve filter to avoid sand and mud impurities in the water from blocking the water inlet, causing the water inlet to become smaller and causing no ice production. 8. The water pipe, water tank, refrigerator and protective film of the snowflake ice maker should be cleaned once every two months. After understanding the above problems, I believe it will bring you a lot of help, and work more efficiently for our snowflake ice machine.
Guangzhou Icesource Co., Ltd promises that we will manufature our products in accordance with the strictest quality standards.
ice maker machine are the in thing today. To buy a for yourself do visit Guangzhou Icesource Co., Ltd at Icesource .
cold room supplier is produced by Guangzhou Icesource Co., Ltd’s professional skills in high technology.
There are ample scientific evidence of reducing the risk of ice maker machine.
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English