Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   

Language

Installation steps and precautions of ice spring flake ice machine:

2022/02/25
Installation steps and precautions of ice spring flake ice machine:
1. After unpacking, assemble the flake ice machine and the ice storage room together. The operation surface of the flake ice machine (charged box surface) and the ice storage room are in the same direction. Adjust the feet at the bottom of the ice storage compartment of the flake ice machine to ensure that the flake ice machine is placed horizontally and stably.
2. Flake ice machine accessories: water pipe, one end is connected to tap water, the other end is connected to the water inlet on the water tank of the flake ice machine, just turn on the tap water. Overflow: When the flake ice machine is shut down, excess water will flow out, and the water pipe can be put into the sewer.
3. Take the flake ice machine accessories: brine bucket, fill up with water (25kg water), put in 400g salt (8 taels), mix well, the water pipe with filter tip on the salt water pump, put it into the brine bucket.
4. When connecting 380V flake ice machine power supply voltage: flake ice machine above ICE-500kg (including ICE-500kg), 3p-380V-50hz power supply, L1L2L3 is the live wire, N is the neutral wire, PE is the ground wire, Just connect to the power source as indicated.
5. When connecting the power supply voltage of 220V flake ice machine: ICE-300kg and ICE-200kg flake ice machine are 1P-220V-50hz power supply, L1 is live wire, N is neutral wire, PE is ground wire, connect to the power supply according to the label Then, do not connect the wrong power supply.
6. Turn on the air switch inside the electric box, and turn on the emergency stop switch on the panel of the electric box (turn it clockwise).
7. Start: Click the start button on the panel of the electric box to start the flake ice machine, the flake ice machine reducer and condenser fan will start first, and the compressor will start in 60-90 seconds. After the flake ice machine starts normally, ice can be produced in 5-10 minutes.
8. Stop: Click the stop button on the panel of the flake ice motor box, the compressor will stop working, and the reducer and condenser fan will stop after a delay of 3-5 minutes.
9. The above installation and usage methods are only for Bingquan. If other brands imitate and use, the problem has nothing to do with Bingquan.
CONTACT US
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
العربية
English
Español
français
Polski
Português
русский
Türkçe
Current language:English