How to use the ice maker? What are the top ten things to install and use the ice machine?

　　How to actually operate the ice machine in life is more appropriate to ensure that our ice making mechanism has a large amount of ice, short ice making time, and more convenient operation? The following editor will introduce to you how to use the ice maker? And what are the top ten things to install and use ice maker, welcome to read!

How to use the cbfi ice machine?

　　Pay attention to the environment

　　The environment around the ice machine. Like other refrigerated display cabinets, there should be no heat source around the ice maker, and a good ventilation environment is recommended. The surrounding temperature is recommended not to exceed 30 degrees, so as to avoid excessive temperature leading to poor heat dissipation of the condenser and affecting the ice making effect. The ice maker needs to be placed on a solid and level ground to keep the ice maker level, otherwise there will be noise and no ice removal during ice making.

　　 power supply, water quality guarantee.

　　 The power supply that the refrigerator should use requires a fuse and a leakage protection switch, which is similar to a refrigeration display cabinet and needs to be grounded. The ice-making raw material water should meet the national drinking water standards, and a filter device should be installed to avoid clogging, thereby affecting the ice-making performance of the ice maker.

　　Clean regularly

　　 The ice maker needs to be cleaned regularly, including the inlet valve filter, water pipe, sink and condenser , To prevent blockage and affect the ice making effect. When cleaning the condenser, avoid using sharp objects to prevent damage to the condenser. When the ice maker is not in use, it should be cleaned and kept free of moisture, and then placed in a ventilated and dry place.

　　Read the manual.

　　 When we are ready to use the ice maker to make ice cubes, we first need to simply read the corresponding instructions. Secondly, find the various components of the ice maker, water loading area, power supply area, control panel area, etc., and understand the function of each component. Then you can add water. The method of adding water varies with the specific ice maker. Generally, there are two situations in which it has its own bucket or connected to an external water source. When we simply observe or check the instructions and connect the water source correctly, we can start making ice cubes.

What are the top ten things to install and use the ice machine?

　　1) At least two or more people when moving and installing the ice machine. Prevent injuries to the back or other places.

　　 2) In order to ensure the normal ventilation of the ice maker, the front end of the installation is completely barrier-free and select a well-ventilated area with a temperature higher than 10°C and a well-ventilated area lower than 38°C. Must be installed in a protected area from elements such as wind, rain, spray or dripping water.

　　3) The ice maker cannot be located next to the oven, grill or other high heat sources. The ice machine must be installed with all electrical and water connections in compliance with national and local regulations. Standard power supply (115 VAC, 60Hz, 15 A), local codes and regulations are required for proper grounding according to the National Electrical Code.

　　4) Do not kink or squeeze the power cord or drain line between the ice machine and the cabinet. The size of the fuse (or circuit breaker) should be 15 amps.

　　5) In order to work properly, the ice maker must be leveled. In addition, you need to make a few adjustments.

　　6) All installations must comply with local piping code requirements. Ensure that the hose is not pinched or kinked or damaged during installation. Check for leaks after connecting.

　　7) Before use, take out the packaging materials and clean the ice machine.

　　 8) Turn on the water supply tap, and then turn on the ice maker. When the ice maker is working, never turn the water.

　　9) If the ice maker is not used for a long time, it must be thoroughly cleaned before the next use. Do not leave any solution in the ice maker after cleaning with a disinfectant solution.

　　10) Do not use solvent-based cleaners or abrasives inside. These cleaners may spread the smell to the ice cubes, or damage or discolor the inside. Ice machine cleaner contains acid. Do not use any other solvent-based cleaner products. Protect your hands with rubber gloves.

　　 Thanks for reading, the above is how to use the ice machine in detail? What are the top ten things to install and use ice maker? The introduction, part of the content comes from the Internet, for reference only. Bingquan Refrigeration has been engaged in the production and sales of ice machines, block ice machines, flake ice machines and other equipment for many years. If you want to know more about the price of ice machines, please call for detailed inquiry and serve you wholeheartedly.

Every day of the year, there is some city or town in the world that is changing over to for ice maker machine.
Guangzhou Icesource Co., Ltd aims to hire several additional experienced marketing professionals that can add to our existing talent-pool and help continue the steady growth of our business.
We attach a great importance to domestic market and knows the importance factors of manufacturing cold room supplier, such as producing methods, etc.
By building an connection around CBFI and catering specifically to the craft beer crowd, Guangzhou Icesource Co., Ltd was able to raise the capital and brand awareness needed to successfully break into the domestic market with a groundswell of support.