1. How to use the ice machine correctly
1. The ice maker should be installed in a place far away from heat sources, without direct sunlight, and well ventilated. The ambient temperature should not exceed 35 degrees Celsius to prevent excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. The ground on which the ice maker is installed should be firm and level, and the ice maker must be level, otherwise it will cause no ice removal and noise during operation.
Second, the gap between the back and the left and right sides of the ice machine is not less than 30cm, and the top gap is not less than 60cm. Independent power supply should be used, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding.
Thirdly, the water used by the
cbfi ice machine must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold. And affect the ice making performance.
Fourth, handle the ice machine carefully to prevent violent vibrations. The handling slope cannot be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before opening the ice machine.
Fifth, turn off the power when cleaning the ice machine. It is strictly forbidden to flush the machine directly with the water pipe, use neutral detergent to scrub it, and it is strictly forbidden to clean it with acidic, alkaline and other corrosive solvents.
Sixth, the ice maker must unscrew the water inlet hose head for two months to clean the water inlet valve filter to avoid the sand and mud impurities in the water from blocking the water inlet, causing the water inlet to become smaller and causing no ice production.
Seventh, the dust on the surface of the condenser must be cleaned every two months. Poor condensation heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser.
Eighth, the water pipe, sink, refrigerator and protective film of the ice maker should be cleaned every two months. When not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer. It should be placed in a ventilated and dry place without corrosive gas. Avoid storing in the open air.
The
cold room supplier approach to ice maker machine is becoming increasingly popular; consequently, there is a surge in the demand for .
Guangzhou Icesource Co., Ltd’s mission is to use our extensive cold room supplier experience to deliver tangible business results enabling our clients in industry and government to profit from the advanced use of technology. We strive to build long-term client relationships based on mutual trust and respect.
cold room supplier developed from Guangzhou Icesource Co., Ltd’s unique skills in high technology has helped to produce cold room supplierice maker machine.
As a top provider of products, Guangzhou Icesource Co., Ltd will surely meet your urgent need for cold room supplier solutions. Go to Icesource .
