Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   


How to make the laboratory snowflake ice maker last longer

How to use the laboratory snowflake ice maker for a longer period of time should do the following: Precautions for the laboratory snowflake cbfi ice machine: 1. The laboratory snowflake ice maker should be installed away from heat sources, without direct sunlight, and well ventilated Whereas, the ambient temperature should not exceed 35°C to prevent the excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. The ground on which the ice maker is installed should be firm and level, and the ice maker must be level, otherwise it will cause no ice removal and noise during operation. 2. The clearance between the back and the left and right sides of the ice making machine is not less than 30cm, and the clearance between the top is not less than 60cm. 3. The cbfi ice machine should use an independent power supply, dedicated line power supply, equipped with fuse and leakage protection switch, and reliable grounding. 4. The water used by the ice maker must meet the national drinking water standards, and a water filter device should be installed to filter impurities in the water to avoid clogging the water pipe and polluting the water tank and ice mold. And affect the ice making performance. 5. Turn off the power when cleaning the ice machine. It is strictly forbidden to flush the machine directly with the water pipe, use neutral detergent to scrub, and it is strictly forbidden to clean with acidic, alkaline and other corrosive solvents. 6. The ice maker must unscrew the water inlet hose head for two months to clean the water inlet valve filter to avoid sand and mud impurities in the water from blocking the water inlet, causing the water inlet to become smaller and causing no ice production. 7. The ice machine must clean the surface dust of the condenser every two months. Poor condensation and heat dissipation will cause damage to the compressor components. When cleaning, use a vacuum cleaner, a small brush, etc. to clean the oil and dust on the condensing surface. Do not use sharp metal tools to clean, so as not to damage the condenser. 8. The water pipe, sink, refrigerator and protective film of the cbfi ice machine should be cleaned every two months. 9. When the ice maker is not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer. It should be placed in a non-corrosive gas and ventilated and dry place. Avoid storage in the open air. Maintenance and maintenance of laboratory snowflake ice machine 1. Before any cleaning or maintenance work, please be sure to cut off the power of the ice machine. 2. At least once a year, please trained maintenance personnel to check and clean the condenser. 3. Do not spray water to clean the ice machine. 4. Do not use any alcohol-containing liquid to clean or disinfect the ice machine, otherwise the plastic parts of the machine may be damaged. 5. Do not remove the binding plate and heat dissipation window, only qualified maintenance personnel can remove them.
Guangzhou Icesource Co., Ltd outfits our businesses with cold room supplier because they're relatively affordable and highly customizable.
As a global cold room supplier company, we take on some of the world’s biggest cold room supplier challenges. Guangzhou Icesource Co., Ltd have a whole series of ice maker machine cold room supplier that can solve your cold room supplier problem in an effective manner. Check it at Icesource .
The success of cold room supplier of campaigns largely rides on how you market your company to the crowd.
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English