Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   


Flake ice machine maintenance and maintenance

The condenser of the flake industrial ice maker plays a role of heat dissipation in the refrigeration process. The cleaning of the condenser directly affects the working state of the ice machine. In order to ensure the normal operation of the condenser, its cleanliness must be ensured. Air-cooled condensers are generally required to be cleaned once every three months, and under special circumstances, they are required to be cleaned once a month; water-cooled condensers are generally required to be cleaned once in six months, and under special circumstances, cooling towers are required to be cleaned every three months. Clean once a month. For routine maintenance operation steps, maintenance personnel should memorize the following contents. The appearance of the flake ice machine unit is sanitary and clean, such as evaporator, compressor, condenser, etc. Especially for air-cooled condensers, due to excessive dust, it is easy to block the suction radiating fins and cause the condenser to fail. Frequently clean the scale inside the water tank, the water divider and the evaporator, which is very important for the production of ice flakes. Check whether the water pipe of the drip tray is unblocked. Check whether the lubricating oil level of the reducer is normal and whether the fixing bolts are loose. Check whether the fully loaded ice reflector at the bottom of the ice bucket is normal, and it is required to be on the same straight line. The gear oil of the reducer must be replaced every year. Please clean the inner wall of the evaporator with a soft cloth on average every two months. The water distribution tray, water tank, salt pump, and water tank are cleaned every 15 days. The air-cooled condenser is cleaned once a month. The repaired borneol machine should look like new. Special care and cleaning precautions. Comprehensive cleaning and maintenance must be done by our maintenance personnel or trained personnel. When disassembling the ice maker, please place all parts according to the drawings for disassembly, assembly and debugging. Care should be taken to clean the ice flakes in the freezer during cleaning. Keep away from detergent contamination. The cleaning process is as follows: 1. Cut off the power supply. Prepare the container for the preparation of cleaning agent, and purchase the algae killing solution to prepare it with water. Pour the detergent into the water tank slowly, and close the water supply valve of the water inlet pipe at the same time. Connect the power of the machine and let it run for about 10 minutes, then cut off the power. Then discharge the sewage, open the water supply valve to enter the water, and then connect the power supply and rinse with clean water for 5 minutes to replace the sewage. Pour the disinfectant into the water tank and replace the disinfectant after about 5 minutes. Finally, wash with clean water, lock the water tank, and wipe dry. The maintenance and maintenance of the flake industrial ice maker play a vital role in the performance and life of the equipment. There must be dedicated personnel for maintenance and management of the flake ice machine, and the user should pay attention to the training of the replacement maintenance personnel to ensure the normal operation, repair and maintenance of the flake ice machine, and avoid accidents and losses due to misoperation.
Guangzhou Icesource Co., Ltd has created a professional team which contained with a numbers of engineers and technology experts.
Guangzhou Icesource Co., Ltd will continue to bring our industry nuances of style and approaches to cold room supplier which are consistent with our evolving aspirations.
Guangzhou Icesource Co., Ltd’s model also predicts (i) a positive effect of management on firm performance; (ii) a positive relationship between product market competition and average management quality (part of which stems from the larger covariance between management with firm size as competition strengthens); and (iii) a rise (fall) in the level (dispersion) of management with firm age.
can be used in a wide variety of ways.
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English