Energy saving refrigeration solution supplier since 2004.                                                                                                                                                                                                                                                                                                   


Compressor maintenance needs proper maintenance when large split ice machine is in operation

When our ice machine is used for the first time or the equipment is used again after a long period of power failure, the main power switch control power supply system needs to be normally energized for more than 8 hours, and the lubricating oil needs to be heated to 45-50°C to ensure that the lubricating oil is in The refrigerant is fully vaporized, and the purpose is to prevent the compressor of the ice machine from wearing or liquid hammer from affecting the normal service life of the compressor, but how do we maintain the compressor during the operation to improve the service life of the ice machine? Daily maintenance methods for the compressor of the cbfi ice machine: 1: The compressor can be switched on and off normally no more than 8 times per hour, and the running time cannot be less than 5 minutes. 2: Whether the wire connection of the equipment is firm. 3: After the equipment is turned on, the compressor lubrication needs to be checked. The oil should be changed every 100 hours of normal equipment operation, and the oil filter and magnetic blockage should be cleaned. The lubricating oil needs to be changed every three years or after 10000-12000 hours of operation. 4: Check whether the protection device and related parts of the compressor are normal. Usually when we transport the ice machine, we need to be careful to prevent violent vibration, and the handling slope should not be less than 45 degrees. After long-distance transportation, the ice machine should be placed for 2-6 hours before it can make ice normally. When not in use for a long time, it should be cleaned. Use a hair dryer to dry the ice mold and the moisture in the box, and place it in a non-corrosive, ventilated and dry place. Related reading: Several major problems that ice maker suppliers will not tell customers
The point for Guangzhou Icesource Co., Ltd is that managerial processes are as important as other inputs in production and can create significant competitive advantage.
Guangzhou Icesource Co., Ltd would like to provide our customers with as near perfect protection, as near perfect service as is humanly possible and to do so at the lowest possible cost.'
Equipping cold room supplier with innovative technology and updated processes will simplify daily compliance duties so that they can focus on attracting, retaining, and developing the most engaged workforce possible.
cold room supplier has its grasp on oversees market and has a very good repute. Our products are available at very competitive prices.
Just tell us your requirements, we can do more than you can imagine.
Send your inquiry

Send your inquiry

Choose a different language
Current language:English