Product Information of CBFI high-tech spherical ice ball maker bulk production free quote
Place of Origin:
25 centi degree
Cube ice size:
22mmx22mmx22mm or 29mmx29mmx22mm
PLC program control
Machine body material:
CV series capacity:
1000kg to 20000kg
Germany brand simens
Korea brand LG
Denmark brand Danfoss
Italy brand Castle
20 Set/Sets per Month
Ice cube maker to make cube ice
Application of large ice cube maker
Ice Source commercial cube ice maker is widely used in hotels, restaurants, bars, fast-food shops, supermarkets and cold drink shops, etc. Ice Source cube ice machine is highly efficient, automatic operation, energy saving and environmental friendly and are quickly becoming the most popular choice for clients around the world.
Daily capacity of one single cube ice machine can be from 1 tons to 20 tons.
Cube ice have two sizes for choose, 22mm x 22mm x 22mm, 29mm x 29mm x 22mm.
Cube ice making machine refrigeration system
Checking ice cube machine from the back side
Cube ice machine outlet
Cube ice making machine features:
1. High Production Capability. The production of our cube ice maker can reach 90% to 95% in summer. When the environment temperature is below 23°C, the production of our cube ice maker can reach 100% to 130%.
2. The cube ice is safe to eat. As to the material of cube ice maker, we use 304 stainless steel for the frame and outer shell plate and use Nickel-plate Brass material for producing ice maker (ice molds). The whole processing of cube ice reaches the international standard for hygiene. So the cube ice is safe to eat.
3. Greatly save energy, only 80-85kW.H power is consumed to produce one ton ice. But other factory's small cube ice maker which has the daily capacity of several hundred kilograms, their average power consumption is above 160kW.H for producing 1 ton ice. Our large cube ice maker will save you a large amount of cost in power.
4. The whole processing is automatically and it can reduce your cost in worker.
5. Ice dropping and outgoing automatically, reduce the possibility of contact by human, which can guaranty the ice clean and sanitary.
6. Save space. The design of our whole cube ice maker is optimized and compact. For a whole machine of CV2000 including cooling tower, the land area is less than 5 square meter. And in order to save space, the cooling tower can install outside.
Cube ice making machine Product Model
Compressor Unit Power
The Pipe of Cooling Water
Refer Figure Dimensions (mm)
Cube ice making machine structure design
Germany brand compressor Btzer
Denmark brand expansion valve Danfoss
If you are interested in our products, please contact us. We would be very glad to be on service for you. As the most professional ice machine manufacture in China, we are pleased to do our best offer to open a good market for you. We are definitely to contact you within 24 hours after getting your inquiry.
The demand for the product has been increasing amongst the customers, showing the promising application potential of the product. The product has gained Design Patent Certificate.
we believe in best quality with competitive, reasonable and affordable prices. The product has gained Design Patent Certificate.
Preparation before startingBefore starting up, please check two aspects first. One is whether the gates of each group are in the normal starting state, and the other is to check the cold water source.After the power is turned on, set according to the required temperature.When using the cold storage for the first time, turn on the cooling water pump first, and then start the compressor after normal operation.Cold Storage Room Operation ManagementAfter the refrigeration system is running normally, please follow the following three steps:1. Listen; pay attention to whether each part of the equipment makes unusual sounds during operation;2. Look; pay attention to whether the temperature in the cold storage has changed and whether the temperature has dropped;3. Touch; touch whether the suction and exhaust are cold or hot, and the cooling effect of the condenser.Ventilation and defrostSome refrigerated goods, such as vegetables, fruits, etc., will release some gas during the storage process. When these gases are accumulated to a certain volume, they will cause physiological disorders of the refrigerated goods, resulting in qualitative changes, resulting in deterioration, taste, and even corruption. Therefore, during use, frequent ventilation is required. You can choose to do it in the morning. In addition, the evaporator in the cold storage must be defrosted frequently. After the condenser is used for a period of time, a layer of hoar frost will form on the surface, which needs to be gently swept away with a broom. Do not clean vigorously, otherwise it will easily cause damage to the equipment.1. For the evaporator of the air-cooled ice machine: always check the defrosting situation and whether the defrosting is effective in time, which will affect the refrigeration effect and cause liquid back in the refrigeration system.2. Frequently observe the compressor's operating status and check its exhaust temperature. During seasonal operation, pay special attention to the system's operating status, and adjust the system's liquid supply and condensing temperature in time.3. Run the unit: always observe the oil level and return of the compressor and the cleanliness of the oil. If the oil is dirty or the oil level drops, solve it in time to avoid poor lubrication.4. For the evaporator of the air-cooled ice machine: always check the defrosting situation, whether the defrosting is effective in time, will affect the refrigeration effect, and cause liquid back in the refrigeration system.5. Frequently observe the operating status of the compressor: check its exhaust temperature, and pay special attention to the operating status of the system during seasonal operation, and adjust the system's liquid supply and condensing temperature in time.6. Listen carefully to the running sound of the compressor, cooling tower, water pump or condenser fan, and deal with any abnormalities in time. At the same time, check the vibration of the compressor, exhaust pipe and footing.
Application fields of edible tube ice machine:1. Edible ice factory2. Ports and dock ice factories3. Places where ice is used in coffee shops, bars, hotels, etc.4. Commercial areas such as supermarkets, convenience stores, restaurants, etc.5. Aquatic products and food preservation6. Logistics preservation7. Chemical and concrete engineeringWorking condition requirements of edible tube ice making machine:Ambient temperature: 33°CWater supply temperature: 20°C (water quality should be relatively pure,It is recommended to increase the water intake for areas with poor water qualityWater filter and soft water treatment)Tube ice specifications: standard tube ice outer diameters with diameters of 22, 28, 35,The inner hole is (0mm-15mm);In addition, there are 35 and 41 pipe diameters available.Power supply: all-electric power supply of international general standardExtreme working conditions (range of variable working conditions): environment: 5℃～40℃, water supply: 5℃～30℃.Refrigerant: R22, R404A, R717.Product features of edible tube ice maker machine:Features of tube ice unit1. The special ice-making method can remove impurities in the water. The ice is hard and powder-free.2. The shape of the ice is hollow tube, shiny and transparent, environmentally friendly and hygienic; solid tube ice has also been developed to meet the various needs of customers3. A variety of sizes are available, the outer diameter of the ice is 22, 28, 35mm, and the length of the ice is 25~45mm. It can also be customized according to customer requirements.4. Compared with flake ice, tube ice takes longer to melt.5. The shape of ice is suitable for storage and transportation, and is suitable for various fields.Why choose us CBFI?①Superb R&D and design technology②The latest technology of refrigeration system can reduce power consumption③Specially designed ice defrost④Unique tube ice machine evaporation barrel processing technology⑤Special design of ice skates
Industry Knowledge IntroductionIn the process of concrete mixing, the release of hydration heat of concrete increases its internal volume, especially in the condition of high temperature mixing heat generated by higher; And in the future curing or low temperature environment, concrete temperature drops, resulting in the reduction of the internal volume of concrete, this process will usually cause cracks in the concrete floor or building. CBFI Recommended Refrigeration SolutionsThese adverse effects can be offset by cooling the aggregate (water cooling or using ice instead of water in the cement and aggregate mixture).CBFI has a complete line of ice makers, chillers, ice storage systems and delivery systems to meet every customer's needs. The whole set of equipment has Internet of things function, realizing remote monitoring, automatic control and other functions.Recommend Equipment Flake Ice Machine Plate Ice Machine Ice Raking Storage Flake Ice MakerProject CaseChip ice rake system, QatarThe client is a famous construction company in Qatar. The local climate is hot and the average temperature is high. In order to ensure the quality of concrete, a large number of pieces of ice are needed for aggregate mixing.
Industry Knowledge IntroductionDiazo reactions, coupling reactions and condensation reactions commonly seen in chemical and dye processing are typical exothermic reactions, and the reaction heat should be removed in time. The ideal reaction conditions should be 0-10℃, if the temperature is too high, not only nitrite is easy to decompose, but also accelerate the decomposition of compounds. Many major chemical processing plants use ice to control the temperature of chemicals in the reaction, to add water to the process during cooling, or for rapid cooling to stop timed reactions.For faster cooling, ice is preferred over traditional jacketed tanks or external heat exchangers. Adding ice to the solution gives it a much larger cooling surface area, lowering the temperature in less time and maintaining better control. Ice can be fed continuously or at specific times during the batch process.CBFI Recommended Refrigeration SolutionsIn order to control the reaction temperature and reach the ideal temperature in the production and synthesis of biological pharmaceutical, chemical pharmaceutical, pharmaceutical intermediates and fine chemical industries, a large amount of ice can be added for cooling to control the temperature and ensure the quality of the products.CBFI has a complete line of ice makers, chillers, ice storage systems and delivery systems to meet every customer's needs. The whole set of equipment has Internet of things function, realizing remote monitoring, automatic control and other functions. Recommend Equipment Flake Ice Machine Plate Ice Machine Ice Raking Storage Flake Ice MakerProject CaseShandong, China, 120-ton ice rake projectThe customer is an enterprise mainly producing chemical dyes. Ice making equipment is used to cool the reactor. Based on CBFI's cost-effective equipment and professional after-sales service, they purchased 3 sets of 40-ton flake ice machines, 2 sets of 50-ton rake automatic ice storage system and a set of air ice delivery system.