This product has been considered as the best in the industry and widely used by people from various fields. The product has passed the CE certification.
The product has long enjoyed great fame both at home and aboard and its market prospect becomes brighter. The product has passed the CE certification.
Ice block machine is a kind of ice machine, which can be divided into direct cooling type ice block machine and salt water type ice block machine. The ice cubes produced have the largest dimensions among ice products, have a small contact area with the outside world, and are not easy to melt. It can be crushed into various forms of ice cubes according to different requirements. It is suitable for ice sculpture, ice storage, sea transportation, sea fishing, etc. After crushing, it can be used in all places where ice is used. However, after being crushed, the ice will be partially melted and the amount of ice will be lost. Ice cubes can be divided into transparent ice cubes and milky white ice cubes.Ice block machine is divided into direct cooling ice block machine (means automatic ice block machine) and salt water ice block machine.Direct cooling ice block machine1、The evaporator is made of special aerospace-grade aluminum plate, which is more durable, and the ice cubes meet the requirements of food hygiene;2、Automatic ice melting and deicing without manual operation, the process is simple and quick;3、Deicing in batches, each batch of deicing time only takes about 25 minutes, high efficiency and energy saving;4、Ice cubes can be transported to the ice storage in batches with a forklift, without manual handling, which improves efficiency;5、The overall modular equipment is very easy to transport, move and install on site;6、According to different requirements, each direct ice-making block ice machine is tailor-made for our customers;7、The direct ice making block ice machine can be made into a container type, 20-foot or 40-foot container.Brine ice block machine1、Use titanium tube as the evaporator to improve the heat exchange effect, truly prevent rust and corrosion, and ensure the service life;2、The parts in the salt water pool that are in contact with the salt water are made of PE material, plastic welding, low temperature resistance, and no rust;3、The special design of ice inverting rack and ice melting tank makes the operation easier;4、The ice melting pool is heated by compressor exhaust waste heat, which is more energy-efficient and suitable for areas with low ambient water temperature;5、The overall modular equipment is very easy to transport, move and install on site;6、According to different requirements, each salt water ice-making block ice machine is tailor-made for our customers;7、The salt water ice-making ice block machine can be made into a container type, 20-foot or 40-foot container.
Flake ice is widely used in food processing, manufacturing, and concrete cooling and other fields.1、Fishery: The sea water flake ice machine can be installed directly on the fishing boat to make ice using sea water. Salvaged seafood can be quickly frozen and kept fresh, and fishery is one of the most important application areas of flake ice machines all over the world.2、Aquatic products processing: Flake ice can reduce the temperature of processing media, washing water, and aquatic products, prevent bacterial growth, and keep aquatic products fresh during processing.3、Food processing: For example, when mixing or adding cream twice in bread production, use flake ice to quickly cool down to prevent fermentation.4、Poultry meat processing: huge heat will be generated during poultry and meat processing. Flake ice can be used to cool the poultry meat, and at the same time regulate the humidity of the product and improve the quality.5、Vegetable distribution and preservation: Nowadays, in order to ensure the safety of vegetables, fruits, and meats, more and more physical methods are used to control the temperature in the storage and transportation of products. Flake ice has a rapid cooling effect, which can create a low temperature and high humidity environment to ensure that the subject is not damaged by bacteria.6、Pharmaceutical industry: In many biosynthesis and chemical synthesis experiments, a large amount of ice needs to be added to control the reaction speed and maintain the activity of the organism. Flake ice is hygienic and clean, and has a fast cooling speed. It is the most ideal cooling carrier in this industry.7、Concrete mixing: flake ice is directly used as the source of water in concrete mixing, the proportion is up to 80%. It can provide an efficient and easy-to-control cooling effect. The concrete mixed at a constant temperature will not crack due to physical deformation caused by the temperature, thus ensuring the quality and safety of the project. Globally, flake ice concrete cooling systems are widely used in high-quality large-scale projects, such as large-scale dams, high-grade highways, high-rise buildings and nuclear power plant construction projects, etc...8、Chemical dyes:With the rapid development of the chemical product processing industry, the market's requirements for the quality and technology of chemical products continue to increase. Due to the physical characteristics of ice, the continuous expansion of ice in the chemical industry is determined. In the production and synthesis process of azo-reactive pigments and dyes, diazotization, coupling and condensation are the necessary synthetic processes for production, due to the release of diazotization, coupling and condensation reactions. A large amount of heat is produced, and the ideal reaction conditions should be 0-5 degrees Celsius, so a large amount of ice must be added to cool the temperature during the chemical reaction process to ensure the quality of the product.
The flake ice is thin, dry and loose white ice with a thickness ranging from 1.0 mm to 2.5 mm. The shape of the slices is irregular, and the diameter is about 12 to 45 mm. Flake ice has no sharp edges and corners and will not stab frozen objects. It can enter the gap between the objects to be cooled, reduce heat exchange, maintain the temperature of the ice, and have a good moisturizing effect. Flake ice has excellent refrigeration effect and has the characteristics of large and rapid refrigeration, so it is mainly used in various large-scale refrigeration facilities, food quick freezing, concrete cooling and so on.Flake ice machine vertical evaporatorThe evaporator of the flake ice machine is a vertically erected barrel structure, which is composed of the ice blade, the main shaft, the sprinkler tray, and the drain tray, which are the main components of ice making. Driven by the reducer, they slowly rotate counterclockwise.Principles of flake ice makingThe water enters the water diversion tray from the water inlet of the evaporator of the flake ice machine, and the water is evenly sprinkled on the inner wall of the evaporator through the sprinkler pipe to form a water film; the water film exchanges heat with the refrigerant in the evaporator flow channel, and the temperature is rapid When lowered, a thin layer of ice is formed on the inner wall of the evaporator, which is broken into pieces of ice under the squeeze of the ice skates, and falls into the ice storage through the ice falling port. Part of the uniced water flows back into the cold water tank from the water return port through the water tray, and then passes through the cold water circulation pump.flake Ice making cycleThrough the supplementary water valve, the water automatically enters a water storage tank, and then the water is pumped through the flow control valve to the diverter head, where the water is evenly sprayed on the surface of the ice maker and flows through the ice maker like a water curtain On the wall surface, the water is cooled to the freezing point, and the water that has not been evaporated and frozen will flow into the water storage tank through the porous tank, and the circulation will restart.Ice picking cycleWhen the ice reaches the required thickness (under normal circumstances, the thickness of the ice is 1.5-2.2mm), the hot air discharged from the compressor is re-introduced into the wall of the ice maker to replace the low-temperature liquid refrigerant. In this way, a thin film of water is formed between the ice and the wall of the evaporation tube. This water film will act as a lubrication when the ice falls freely into the groove below by gravity. The water produced during the ice picking cycle will return to the water storage tank through the porous tank, which also prevents the wet ice from being discharged by the machine.Refrigerator condenserIt can be realized with air-cooled, water-cooled or evaporative condenser. The evaporative type is installed higher than the ice machine, the water-cooled condenser is installed below the ice machine or under the refrigeration system, and the air-cooled condenser is installed in the ice machine according to the actual situation. It can also be installed outdoors. If necessary, water-cooled condensers can be used on ships or on shore, using sea water for cooling. Evaporative cooling can be used when the ambient air temperature is high, but from the perspective of efficiency and economy, it is not suitable for water-cooled or air-cooled refrigeration.
The refrigeration method of the ice making machine is to elevate the refrigerant from low pressure to high pressure, so that the heat is discharged from the low temperature environment to the high temperature environment. Since the ice maker machine works continuously, the compressor must be continuously cooled to ensure its working efficiency.Summer is the peak season for using ice machines. The weather is getting hotter and hotter. When the business is good, the ice cubes are not enough, which is also related to the cooling method of the machine. So, choosing an air-cooled or water-cooled ice machine is more suitable for your store?The cooling effect of a water-cooled ice maker machine is determined by the water temperature. The higher the water temperature, the higher the condensation temperature, and the lower the cooling efficiency of the refrigeration unit. The water-cooled ice maker machine can reduce the condensing temperature of the refrigeration unit and improve the refrigeration efficiency, and the loss of ice production capacity in summer will not be too large.Advantages: make the condensing temperature of the refrigeration unit low, improve the refrigeration efficiency, even in summer, the loss of ice production capacity is small, and the influence of the ambient temperature is small; the cooling effect is good, and it is suitable for medium and large refrigeration systems.Disadvantages: Need to install drainage system and water supply system, which consumes water resources. Air-cooled ice making machine:The cooling effect of the air-cooled ice maker machine is determined by the ambient temperature. The higher the ambient temperature, the higher the condensing temperature, and the lower the cooling efficiency of the refrigeration unit. Under normal circumstances, it is not recommended to use air-cooled ice machines in places where the ambient temperature exceeds 42°C.Advantages: no need of water resources, relatively convenient and convenient installation, suitable for occasions and areas with insufficient water supply and low water pressure.Disadvantages: high cost input; high condensing temperature, which reduces the operating efficiency of the refrigeration unit; large loss of ice production capacity in summer, not suitable for unventilated places such as kitchens, lanes, and storage rooms.Air-cooled or water-cooled have their pros and cons, depending on cost and usage conditions.The air-cooled heat transfer coefficient is low, so a larger heat transfer area is required, resulting in a larger equipment volume; the advantages are simplicity and low cost.Water-cooling has a high heat transfer coefficient, but free air cannot be used. Water is required, water costs money, and it needs to be treated. Direct draining of hot water will also cause waste. Water circulation requires cooling towers and the like. To seal, to pump, to pipeline, the system is quite complicated. In order to improve the heat transfer coefficient, the cost is not small.and so:If the cooling capacity is not large, and the space and noise requirements are not high, air cooling is good. However, if the ambient temperature is too high, the air temperature is high, and the air cooling efficiency is low, the working pressure of the ice maker machine may be relatively high.Pursue efficiency, reduce the footprint, or the environment is harsh, then use water cooling.For an ice machine without feelings, whether you are wind-cooled or water-cooled, it does not feel the gentleness of the wind or the harshness of the water; as long as the temperature of its condenser is lowered to ensure that the refrigerant is condensed and the circulation is smooth, it will do. .