Bingquan
flake ice machine installation requirements:
1. The flake ice machine should be placed in a ventilated, safe and clean place around.
2. The flake ice machine should not be placed in the open air, should not be exposed to direct sunlight and rain forests, and should not be close to heat sources.
3. The operating environment of the flake ice machine cannot be lower than 5℃, not higher than 35℃, and the standard ambient temperature is 25℃.
4. There should be enough space around the flake ice machine, especially the heat dissipation part (condenser), and there should be enough heat dissipation environment.
5. Please adjust the feet at the bottom of the ice storage compartment of the flake ice machine to ensure that the flake ice machine is placed horizontally and stably.
6. Please connect to a standard water source, with a water pressure of 0.1Mpa-0.5Mpa.
7. The power supply voltage of the flake ice machine must be consistent with the mark on the nameplate of the flake ice machine (ie 3P-380V-50Hz or 1P-220V-50Hz), the voltage fluctuation must not exceed ±10% of the rated voltage, and all circuits must comply with the country Standards, it must be grounded reliably, and the grounding wire must comply with electrical standards.
