3 big precautions for using ice block machine

by:CBFI     2022-01-06
When using the ice block machine, you must know some common sense of operation. For example, one thing that needs to be paid attention to is the heat dissipation problem, because some heat will be generated when the ice cube is made and needs to be dissipated, so first of all, it should not be placed too close to the heat source. Otherwise, the location will bring a burden to the equipment, and it will also affect the efficiency of making ice bricks, so many details must be paid attention to. Specifically, the precautions for the use of ice block machine also include the following aspects.

One, pay attention to placing in a suitable environment

Before these use, the ice block machine should be placed in a relatively clean and well-ventilated environment. It should not be operated in the open air to avoid being exposed to wind, rain and sun, otherwise it is very dangerous and easy to age. . And the ice block machine manufacturer emphasizes that it must be placed flat on the ground so that it can run smoothly during operation to avoid noise or dangerous conditions. At the same time, it should also be noted that there should be a certain amount of space around it so that it can be updated. Good heat dissipation.

2. Pay attention to the conditions of use

The ice block machine should be supplied with its independent power supply and ensure that the power supply has grounding measures. This is the most basic problem that needs to be guaranteed to enable the machine to operate normally, and it must be equipped with fuses and leakage protection At the same time, the voltage fluctuation of the switch can not exceed the specified range in order to ensure the safety of use. At the same time, the water source used by the ice block machine should meet the drinking water standard, and it can only be officially used after it has been filtered.

Three, pay attention to regular cleaning work

In order to ensure the normal operation of the ice block machine, the water valve filter should be cleaned every two months to avoid clogging, and although the ice block machine will drain the water in the sink every time it is used up But it is not enough to do so. It must be thoroughly cleaned and disinfected at least once every six months. If it is not used for a long time, it should be cleaned before it can be reused. And the ice block maker also reminds you to keep the inside dry after washing, you can use a hair dryer to dry it.

The above are the aspects included in the use of ice block machine. In addition, you must take great anti-vibration measures when transporting. If it is long-distance transportation, you can put some foam inside and fix it on the car to avoid shaking as much as possible. . The manufacturer of the direct cooling ice block machine introduced that it should not be used immediately after the handling is completed. It should be allowed to stand on the flat ground for several hours before it can be turned on and used.
Custom message